Boost Control Solenoid – 4 Port (4BCS) – är ett tillbehör från Link ECU som kompletterar din motorstyrning. Oggeracing är återförsäljare av Link ECU i Sverige och hjälper dig med val av produkt, installation och mappning.
Teknisk information (från Link, på engelska)
The Link 4-Port Boost Control Solenoid provides precise and reliable electronic boost control for high-boost turbocharged applications. Compatible with internal and external wastegates, as well as single or multiple wastegate configurations, it allows significantly higher boost levels than a standard 3-port configuration, reaching approximately 6-7 times the base wastegate spring pressure. Its fast, consistent response and proven design make it the ideal solution for applications requiring higher boost levels.
Models Supported |
Suitable with all Link ECUs. For applications that do not require the wider boost range of a 4-port solenoid, consider our 3-Port Boost Control Solenoid (PN 101-0015). |
Warnings |
Spare Auxiliary Output, switched to ground. 12V ignition-switched power supply. MAP sensor. Open or Closed Loop Boost Control configured in the ECU. No additional boost controller required. |
Specifikationer
Highlights |
Series: MAC 45 Max Pressure: 120 PSI Port Size: 1/8″ BSPPL Power Requirements: 12 VDC (5.4W) with 18″ (45cm) coil leads Included Accessories: 4 x 1/8″ BSP hose tail fittings for easy connection |
Product Dimensions |
30mm(L)x45mm(W)x25mm(H) 1.18in(L)x1.77in(W)x0.98in(H) |
Product Weight |
135 grams (4.76 ounces) |
Electrical |
Operating Voltage Range: 10.2-13.2V Maximum Continuous Current Draw: 495mA |
Misc. |
We recommend starting with a PWM Frequency of 25Hz for this Boost Control Solenoid. A detailed description of setting up boost control can be found in the help file within the PCLink software which is available for free download. |
What’s in the Box |
Boost Control Solenoid (4 port) 4x Hose Fitting 1/8 BSPT Nickel P Accessory instructions |


















Recensioner
Det finns inga recensioner än.